Blog

It is not safe to leave light bulb sockets empty. They pose an electrocution risk and a fire hazard because of high enough voltage to cause serious electrocution injury. Also, debris could get into the socket, get ignited, and start a fire, although this is an unlikely scenario.Sep 14, 2020

The maximum watt for a standard type 'A' base lamp-holder is 300 Watts. It is important that the light fixture supports the wattage.

Safety Designed:CE Certificated,Light Bulb Adapter is made of PBT ,heat resistant could be up to 392°F（200℃）,100% safe from electric leaking,fire hazard and melting.

While the light fixture itself should be grounded, it's not available via an adapter. In an outdoor situation, ground protection is even more important than indoors; if your exterior circuit also includes exterior receptacles, it should already be covered by a GFCI.

• Connect the neutral wire -- the one with the ridge in its insulation -- to the silver socket terminal and the other wire to the brass socket terminal. Place the socket in the lamp, feeding the wire through the socket cap. Reinstall the socket's insulating sleeve and shell, pushing on the shell until it snaps in place.

• You'll need to use a Type B plug adapter for Guam if your plug doesn't fit into a Guamanian power outlet. The type of power adapter, power converter or charger that you'll need when visiting Guam all depend on the voltage and type of device that you're attempting to charge with a Guamanian power outlet.

• Type B plug adapter, consists of three prongs : 2 flat parallel pins plus a ground. This style plug belongs to North American countries, some South American countries and Japan. This is a grounded style plug, which means it can be used for sensitive items.

• What's a light socket adapter? light socket adapter enable light bulbs to be fitted to lamps or other light fixtures that are built with sockets of varying sizes. These light socket adapters essentially work as interim sockets that, once screwed into a fixture's own socket, allow for such fixtures to use either larger or smaller light bulbs than what they have been built to hold.

Plug & socket types. There are currently 15 types of electrical outlet plugs in use today, each of which has been assigned a letter by the US Department of Commerce International Trade Administration (ITA), starting with A and moving through the alphabet. These letters are completely arbitrary: they don’t actually mandate anything.

While an international plug adapter will allow your device to draw power from a socket, it won’t usually convert the voltage of the socket. Sockets in Canada and the U.S. typically output 110 to 127 volts, and most North American appliances and devices are designed to draw energy safely from these sockets.

For example, U.S. wall outlets require a plug with two flat vertical prongs, while outlets in the U.K. require a plug with a top vertical prong and two bottom horizontal ones. And one major heads up: the adapter may not convert electricity, which you may also need. Lydia Mansel of Just Packed learned this the hard way.

A plug adapter updates the shape of your device’s plug to fit the outlet in the country you’re traveling to. It doesn’t convert voltage. A voltage converter adapts the electrical voltage from the device to the outlet. This is valuable because American devices sometimes operate at different voltages than is available in other countries.