How do you measure for a toilet seat?
How do you measure for a toilet seat?
Measure the width of the bowl at its widest point. Be sure to place your measuring tape on the outside of the brim for an accurate dimension. Measure the length of the bowl from between the seat bolts to the outside edge of the front of the bowl. If you have a round bowl, this dimension should be about 16.5 inches.Jan 26, 2017
Are toilet seats standard size?
Are toilet seats a standard size? No, there isn't a standard size for all toilet seats, due to a variety of toilet styles. To find out the best seat for your toilet, you will need to measure your loo.
How do you tell if you have a round or elongated toilet?
Toilet seats are sold by shape (not by length).
If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat. Notice also that the elongated bowl is shaped more like an oval (egg-shaped).Jun 14, 2021
How are seats measured?
The Hip, or Seat, measurement is the largest measurement around the widest part of your hips.
How do I know what toilet seat?
Start by measuring the seat from back to front. Buy a standard round seat if the length is around 16 in (41 cm). If it's around 18 in (46 cm) long, go with an elongated seat. Things get a little more complicated if your toilet is old or if you're investing in a specialty seat.
Can I put a round toilet seat on an elongated toilet?
While you can install a round toilet seat on an elongated toilet, it isn't recommended. A round toilet seat will not fully cover the toilet bowl rim of an elongated toilet leaving the rim exposed.
Does toilet seat have to match toilet?
As a general rule, match elongated seats to elongated toilets and round-front seats to round-front toilets. However, before you make your final choice, you will want to be certain that your toilet seat is compatible with your toilet in terms of size, style and color.
Which is better round or elongated toilet seat?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31" from the wall, while round fixtures max out at 28". Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
How often should a toilet seat be replaced?
Q. Why should I replace my toilet seat? While a toilet typically lasts at least 15 years, toilet seats last only about 5 to 7 years before they begin to crack or become stained to the point that, no matter how hard you scrub, they no longer appear clean. That's when it's time to consider replacement.Sep 22, 2021
How to measure for a toilet seat?
- First,find the bolts where the seat attaches to the bowl and measure the distance between them. The standard measurement is 5 1/2 inches.
- Measure the width of the bowl at its widest point.
- Measure the length of the bowl from between the seat bolts to the outer edge of the front of the bowl. ...
Is toilet paper dirtier than a toilet seat?
- And not just by a little - it's 100 times dirtier than the average toilet seat . But that totally makes sense if you, like many, forget to give this surface a swift cleaning until it starts to feel sticky. To avoid these germs, use a disinfectant wipe to rub down dirty surfaces once a week.
How do you measure toilet seat?
- Here are the steps to learn how to measure toilet seat: Be sure to take measurement from post hole to post hole. It means you should start measuring at the back of the seat area – the standard size is 5 ½ inches between holes. Take the measuring tape and reach out for the center front of the toilet bowl.
How do I know what size toilet seat to buy?How do I know what size toilet seat to buy?
Before buying a new one, use a tape measure to determine what size toilet seat will fit the bowl. First, find the bolts where the seat attaches to the bowl and measure the distance between them. The standard measurement is 5 1/2 inches. Measure the width of the bowl at its widest point.
How do you measure a toilet seat with a tape?How do you measure a toilet seat with a tape?
With the end of the measuring tape in place, draw the tape to the very tip of the bowl and note the seat’s length on a piece of paper. For an accurate measurement, hold the tape in line with the center of the bolts. If there are flaps covering the bolts, lift them with your fingers or a flat-head screwdriver to get a more accurate measurement.
How do you measure the size of a toilet bowl?How do you measure the size of a toilet bowl?
You will need to take 4 measurements from your toilet: Length, width, height and distance between fixing holes. For length, place one end of your tape measure between the fixing holes and stretch out to the very front end of your toilet. For width, measure across the pan at the widest point.
How do I measure the width and length of the seat?How do I measure the width and length of the seat?
When measuring the width, make sure that you measure between the two widest points on the sides of the seat. For length, you want to measure from between the drill holes on the back of the seat to the edge of the front.