How much area does a ton of limestone cover?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

How do I calculate how much stone I need?

Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need. When using this equation, make sure all of your measurements are in feet.Jul 26, 2021

How do you calculate yards of limestone?

For example: a driveway measuring three-yards wide by twenty-yards long has a surface area of 60 square yards. Multiply 60 by 1/6th of a yard (six-inches) to determine you will need 10 cubic yards of limestone.

How many yards is 2 tons of limestone?

According to imperial or us customary measurement system a ton of limestone is 2000 pounds, as we know 2600 pounds of limestone would make one yard, 1 ton limestone in yard = 2000/ 2600 = 0.77 yards, in this regard, “How many yards are in a ton of limestone”, so, there are 0.77 yards in a ton of crushed limestone.

How much area does a 20kg bag of pebbles cover?

Calculate packaged rock

A 20kg bag of gravel will cover approx 0.5m2 of garden to a depth of 50mm.

What area will a 25kg bag of gravel cover?

For Decorative Gravel

As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm.

What is crushed limestone?

What Is Crushed Limestone? Crushed limestone typically produced by mining limestone or dolomite rock deposits. The process involves breaking of collected rocks down to the specific sizes with the help of different rock crushers/machines.Jun 22, 2020

How deep should you lay gravel?

Decorative aggregates should be laid at a depth of 50mm. This ensures proper coverage without revealing the surface below. Laying the gravel too deep will mean you sink into the surface and it becomes difficult to walk across.Sep 26, 2016

How many tons of limestone are in a dump truck?

Depending upon the tare weight of the transport vehicle, typically 22 to 26 tons as it pertains to an 80 thousand pound gross.

How many yards is 9 tons of gravel?

6 tons of gravel = 0.714 ×6 = 4.284 cubic yards, 7 tons of gravel = 0.714 ×7 = 4.998 cubic yards, 8 tons of gravel = 0.714 ×8 = 5.712 cubic yards, 9 tons of gravel = 0.714 ×9 = 6.426 cubic yards and 10 tons of gravel = 0.714 ×10 = 7.140 cubic yards.

image-How much area does a ton of limestone cover?
image-How much area does a ton of limestone cover?

How much is the price per ton of limestone?

  • The cost of limestone will depend on the amount purchased, quality, type, if delivery is involved, geographical location and where it's purchased from. On average, plan on spending anywhere from $10 to as much as $55 per ton. Ohio Mulch, for example, lists its prices online and charges $43.99 per ton.


How much landscaping rock do I Need?

  • Calculating How Much Landscape Rock You Will Need. One cubic yard of landscape rock will cover a 10 square foot area with rock approximately 3 inches deep. If you want the landscape rock to be 6 inches deep, you will need two cubic yards of rock.


How much does limestone rock cost per ton?

  • By the ton, the costs of crushed limestone will vary anywhere from $20 to as much as $30. 1.5 tons can cover one cubic yard. Young’s Sand and Gravel, a landscape supply company located in Ohio, charges $20 a ton for all limestone, except for #8, which can cost $2 more a ton.


How do you calculate limestone?

  • Multiply the cubic yards of crushed limestone you need by 2700 (the number of pounds in a cubic yard) to determine the number of pounds needed, then divide that quotient by 2000 to determine the number of tons to order. Show Comments.

Share this Post: