Blog

A wall trim — also called interior trim — is a general term often used to describe all types of molding and millwork. It is used to frame windows, doors, walls, floors, even ceilings — defining the architectural style of a room.Apr 23, 2019

Tip. Medium-density fiberboard (MDF), natural wood, or polyurethane trim can be used on walls. Wood is more solid and durable than either plastic or MDF. If you want the natural clear-coat or stained wood look, then natural wood (such as hemlock) is the best way to go.Dec 9, 2021

Moulding (also spelled molding in the United States though usually not within the industry), also known as coving (United Kingdom, Australia), is a strip of material with various profiles used to cover transitions between surfaces or for decoration.

“A panel mould, or panel moulding can refer to a variety of moulding profiles most often used to create or embellish panels on either flat or recessed surfaces. These mouldings are commonly used on doors, walls, architectural paneling, mantels and cornice assemblies.”Oct 4, 2017

Traditionally, board and batten siding starts with wide vertical planks (boards), which are then joined together by thin vertical strips (battens) to cover the seams. Homesteaders and farmers would use sawmills to cut the long boards, and the battens were put in place to make the structure as airtight as possible.Aug 21, 2019

Cove molding

performs the same function in the same place on the wall as crown molding. The main difference is the profile; cove molding has a concave profile, which bows inward, while crown molding has a convex, flatter appearance that projects out from the wall.Nov 17, 2009

This is a twist on a board and batten, which basically means putting wood strips on your wall in a pattern or design! But we did it in a shaker style. It's an affordable way to give character to your home, add a focal point, and elevate your space.

Wainscoting is a protective barrier applied to the lower half or lower third of a room, usually on all the walls. Board and batten refers to a specific design that can be used to create this protective barrier.

Is crown molding worth the expense? While a single room may only run you an average of $500, doing the whole house could easily reach $8,000 or even $15,000 for larger homes. ... It's perfectly acceptable to have crown molding in some rooms but not all of them, so you can add a nice touch without the full expense.Apr 12, 2021

Historically, chair rails were used to protect plaster when chairs were backed up against the walls to clear space in the middle of a room. Like many functional inventions, this one became more decorative over the years. ... Chair rails are still used today to create a more formal and traditional design.Jul 21, 2016

These 5 types are extrusion moulding, compression moulding, blow moulding, injection moulding and rotational moulding.

WHAT'S THE DIFFERENCE BETWEEN MOLDING AND TRIM? ... TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.). MOLDING (or moulding) is a broad classification of millwork (any type of woodwork that is produced in a mill …May 8, 2019

Trim and molding are decorative wood pieces that border or line features of your home. When these items are placed around doors and windows, they are called casings (imagine a picture frame). They can be added to the existing architecture of your home and enhance the features already present.May 1, 2015

• Next, starting from the bottom of the wall, measure and cut (according to your calculations) the short vertical molding pieces that will comprise the bottom squares. Before you attach the pieces with the nail gun, tape them to the wall and measure the width between each strip of molding to make sure you have them spaced evenly.

• In addition to an office, molding on walls looks amazing in a living room, bedroom, bathroom, dining room, entryway, and laundry room. So let your imagination run wild when thinking of places to add some wall molding and trim.

• Finishing Once the wall molding is installed, you’ll need to caulk around the inside and outside edges of the unfinished molding strips where they meet the wall to cover the gaps. Using a caulking gun makes this job much easier!

• Second, although the instructions for how to install decorative molding might look a bit daunting, once you get the frame and first row done, you’ll just be repeating the same steps and it goes pretty quickly after that. I promise, once your feature wall is complete, you’ll love it so much it will be worth it!

Next, starting from the bottom of the wall, measure and cut (according to your calculations) the short vertical molding pieces that will comprise the bottom squares. Before you attach the pieces with the nail gun, tape them to the wall and measure the width between each strip of molding to make sure you have them spaced evenly.

In addition to an office, molding on walls looks amazing in a living room, bedroom, bathroom, dining room, entryway, and laundry room. So let your imagination run wild when thinking of places to add some wall molding and trim.

Some of the most stylish modern molding ideas are made up entirely of straight, uniform lines. For a sleek look, your trim should match the wall color behind it. Metallic trim contrasts beautifully against dark, neutral shades. Or you can adopt a Scandinavian-style aesthetic by mounting natural wood trim against a white wall.

I used painter’s tape to help hold the planks in place while the Liquid Nails dried. We let them dry overnight and then replaced the crown molding over the top edge of the vertical planks. I used basic door frame casing to finish off the opening in the wall for firewood.

Baseboards. A home's baseboard is a decorative and functional type of wood trim that runs along the very base of walls, thus the name baseboards or base molding.Oct 23, 2021

Craftsman-style homes are inspired by hand-crafted features. Unlike Victorian homes, Craftsman homes feature horizontal lines and take an artisanal approach to decoration. ... Craftsman style homes typically feature thick trim around the windows and doors.May 5, 2021

Several types of hardwoods such as cherry and walnut are commonly used for stain grade moldings and trim because of how well they absorb the stain. Softwoods such as fir or pine are regularly used for paint grade trim and moldings since it is generally less expensive and easy to work with.Dec 12, 2016

WHAT'S THE DIFFERENCE BETWEEN MOLDING AND TRIM? ... TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.). MOLDING (or moulding) is a broad classification of millwork (any type of woodwork that is produced in a mill …May 8, 2019