Blog

In general, plywood and most hardwood paneling is 1/2- or 3/4-inch thick. Other thickness are slightly different, measuring 11/16, 9/16 or 5/8 inch thick. MDF is usually the thinnest paneling available, about 1/4-inch thick. Thicker hardwood panelings that are more than 1 inch thick are also available.Jul 18, 2017

Our designers expect wall treatments will continue to grow in popularity, such as beadboard (wood paneling with vertical lines instead of horizontal), picture molding, and shiplap plank styles. White on white, or tone on tone, for treatments and molding is on trend right now.Nov 6, 2020

They're still very durable.

Just because veneer furniture isn't completely made up of solid wood, doesn't mean it's not durable. Because veneer furniture is not prone to the same aging effects as solid wood, such as splitting or warping, wood veneer furniture will often outlast solid wood furniture by years.

Scratches Easily.

Veneer is durable overall, but it is more susceptible to scratching than other furniture materials. This means you need to be a little more careful with veneer furniture than you would with laminate or solid wood.May 12, 2017

In woodworking, a veneer is actually a "paper thin" cut of wood that's applied to both sides of a strong core surface, like furniture-grade MDF or substrate material, to seal and stabilize it—which is critically important when you're fashioning built-in furniture or anything with a mechanism.Aug 25, 2017

The standard veneer sheet thickness is 0.4mm, 0.5mm, 0.55mm or 0.6mm. And common thick veneers can have a thickness more than standard veneer thickness — 0.8mm, 1.0mm, 1.5mm, 2mm, 3mm or 4mm.

• Figure out if you can veneer over the existing wood veneer. Is there already veneer on the surface you're looking to add your new wood veneer to? It's not always necessary to remove the old wood veneer before moving forward, but it should be intact, not bubbled or cracked, and firmly attached, if you are even considering veneering over it.

• Cut in the edges of your wall with texture paint and a paintbrush. Apply paint to the brush generously and frequently to keep your texture effect even. If you've kept the grooves in your paneling, fill these with paint using a paintbrush.

• Wood paneling has the right texture to lay wallpaper on, if that's something you decide you want to do instead of paint. You have to prepare the surface for the wallpaper ahead of time, especially for the glue that goes on the back on the wallpaper when you lay it.

• Tongue and Groove Paneling. Tongue and groove paneling is a popular panel that many homebuilders use as options for a different look to place in the home building process. Paneling has become a frequently used option in lieu of other methods of redecorating and restoring homes.

We’ve endeavored to select superior veneers to exceed the highest A-AA architectural grade distinction. Our panel cores are all FSC certified, and most of our veneers are available with FSC certification. These durable and elegant wood veneer wall panels have added a touch of warmth to spaces like offices and conference rooms.

Press the panel for 60 minutes or as described on the veneer glue instruction label. A vacuum press is the ideal tool for clamping veneer to a substrate because it applies a significant amount of even pressure distributed across the entire surface. If you do not have a vacuum press, you can usually get a good finished panel with clamps and weights.

Our panel cores are all FSC certified, and most of our veneers are available with FSC certification. These durable and elegant wood veneer wall panels have added a touch of warmth to spaces like offices and conference rooms. Below you’ll find a sample of our standard range of wood panel veneers.

Real wood veneer paneling from Murphy offers an attractive, durable wall paneling option perfect for both residential and commercial uses. Our panels are also a popular choice for demanding high-end cabinetry and fine furniture makers.

Aluminium, steel and copper can make durable wall panels for your living room. Chipboard: This is made by hot pressing sawdust and chips. It is not as strong as wood, therefore can only be used in dry areas. However, it gives a wood-like finish.May 18, 2021

• Create a Cutting Guide. Check that the surface where you'll be installing veneer — such as the floor,countertop or moulding — is level.
• Make a Jury Stick
• Start at the Corner
• Check the Edges
• Cut to Size
• Clean Up

• Man-made Materials. Instead of quarried natural stone or cement based manufactured stone veneer, faux stone siding is a foam-like material composed of polyurethane, UV inhibitors and fire retardants. Along with looking like the real thing, this versatile material is sturdy and resists heat.

• Faux brick panels are solid pieces of material designed to look like real stone or brick. These panels are typically thin and lightweight, so that they may be placed over existing home building materials, such as siding and drywall. They may be installed by professional contractors or by the homeowner personally.